I have changed my operator logo on my 6600 using FE explorer but the problem is i don't know how to get back my default operator logo.. Need help, ThanKs!!!
Full Version: Operator Logos
I have changed my operator logo on my 6600 using FE explorer but the problem is i don't know how to get back my default operator logo.. Need help, ThanKs!!!
hey, can you teach me how to change the operator logo? i've always wanted to do that! i'm using seleQ, would that suffice?
Sorry but I have'nt tried seleQ..
arn, using FExplorer:
1] go to C:\System\Apps\phone\oplogo and delete whatever is in there (usually looks like 525_2_1 or something with file extension .bmp)
2] switch off your handphone then, turn it on again… voila !!! ur operator’s name is back
note: when setting oplogo thru Fexplorer, u will be prompted to re-start ur phone; when removing the oplogo, u hv to manually switch off / on ur phone.
1] go to C:\System\Apps\phone\oplogo and delete whatever is in there (usually looks like 525_2_1 or something with file extension .bmp)
2] switch off your handphone then, turn it on again… voila !!! ur operator’s name is back
note: when setting oplogo thru Fexplorer, u will be prompted to re-start ur phone; when removing the oplogo, u hv to manually switch off / on ur phone.
weng, i haven't used seleQ b4... but, here are the steps for those using FExplorer; i hope the steps are similar with that of using seleQ so, u may have an idea how to do it (and perhaps, post the tutorial later on for our fellow M9 pals, hehehe)...
1] i suggest making a folder named oplogo in ur mmc and keep ur oplogos there; oplogos are normally 97 x 25 pixels and maybe jpg, bmp or gif; try resizing any pics of ur choice or u can also try these links :
http://www.symbianthemes.com/oplogos/
http://www.playmobus.com/mobile/index.php
2] open fexplorer and navigate to E:\ … where u hv placed ur oplogos; pressing d joystick on a highlighted item will lead u to the gallery and show u d pic…
display from the gallery is not gud though bcoz d pic gets stretched - i don’t know why this is so on the 6600 whereas, doing d same in a 3650 is such that the actual size of the pic/oplogo is shown and hence, u hv a pretty good idea how it will actually look on d operator logo area of ur phone… in fairness though, it still helps to at least give u an idea of what logo u r going to use especially if u 4get d filename of a particular pic u want…
anyway, that’s not our main objective… so…
exiting the gallery (if u did press d joystick) will bring u back to the oplogos/pics…
now,
3] scroll to the file/pic u want to use then press, “options” => “File” => “Set as operator logo”
the “Set as operator logo” option is not readily seen as sub-menu of File… u have to scroll down to it… it is below Properties w/c in turn is below Make Dir w/c u can readily see…
4] upon choosing “Set …” ; a message will appear that says “System will reboot when done - OK?”; just press OK… ur phone will then restart then, voila !!! u’ve set ur operator logo…
Notes:
Repeat steps 2 thru 4 whenever u want to change oplogo...
When u want to remove an oplogo and return to the operator’s default, pls refer to my reply to arn_gab’s query above…
hope this helps…
addendum: am not sure whether there is any conflict is u install both SeleQ and FExplorer in the same phone...
1] i suggest making a folder named oplogo in ur mmc and keep ur oplogos there; oplogos are normally 97 x 25 pixels and maybe jpg, bmp or gif; try resizing any pics of ur choice or u can also try these links :
http://www.symbianthemes.com/oplogos/
http://www.playmobus.com/mobile/index.php
2] open fexplorer and navigate to E:\ … where u hv placed ur oplogos; pressing d joystick on a highlighted item will lead u to the gallery and show u d pic…
display from the gallery is not gud though bcoz d pic gets stretched - i don’t know why this is so on the 6600 whereas, doing d same in a 3650 is such that the actual size of the pic/oplogo is shown and hence, u hv a pretty good idea how it will actually look on d operator logo area of ur phone… in fairness though, it still helps to at least give u an idea of what logo u r going to use especially if u 4get d filename of a particular pic u want…
anyway, that’s not our main objective… so…
exiting the gallery (if u did press d joystick) will bring u back to the oplogos/pics…
now,
3] scroll to the file/pic u want to use then press, “options” => “File” => “Set as operator logo”
the “Set as operator logo” option is not readily seen as sub-menu of File… u have to scroll down to it… it is below Properties w/c in turn is below Make Dir w/c u can readily see…
4] upon choosing “Set …” ; a message will appear that says “System will reboot when done - OK?”; just press OK… ur phone will then restart then, voila !!! u’ve set ur operator logo…
Notes:
Repeat steps 2 thru 4 whenever u want to change oplogo...
When u want to remove an oplogo and return to the operator’s default, pls refer to my reply to arn_gab’s query above…
hope this helps…
addendum: am not sure whether there is any conflict is u install both SeleQ and FExplorer in the same phone...
Thanks a bunch pal, it worked!!!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.